Arahant Play Equipments

Details: 

• Standing Twister equipment made up of 3inch B class GI pipe; Prime Stand duly, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For developing the muscles of hip joints, abdomen and stomach area.

Details: 

• Seating Twister equipment made up of 3inch B class GI pipe; Prime Stand duly,  Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For developing the muscles of abdomen and stomach area.

Details: 

• Straight Trainer/Sky Walker equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• High quality rubber grip are also used for firm handling.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For improving the flexibility of lower limbs and hip joint.

 Horse Rider equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe. The handle frame is made of 32mm OD G.I. pipe. The remaining frame is made of 42mm OD G.I. pipe. A flat of 50mm x 5mm is induced between handle and main pipe.?? 60mm seamless pipe bushes. Permanent lubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia ??225mm and 10mm thickness is welded at bottom. All welded joint are of good quality. High tensile steel with galvanized nut & bolts to be used. The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness.
USE:-For improving and developing arm & leg muscles.

Details: 

• Leg Press equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For exercise of leg and thigh provide strengthen to leg muscle and developing the whole body joints.

Details: 

• Surf Board equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• Foundation plate of dia 225mm and 10 mm thickness is welded at bottom.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For exercise of leg and thigh provide strengthen to leg muscle by swinging both legs together, it develops the lower abdomen hips and provide balance of body.

Minimum order quantity: 1 Piece

Air Walker is the best alternative to elliptical training equipment. It has pedals traveling in a smooth and arched path, creating a jogging, running or walking motion.

Benefits:

• Strengthens Cardiac and Pneumonic function
• Develops flexibility coordination of the lower limb’s muscles
• Heals Hip joint aches and Muscular inability
• Stimulates running motion
• No pressure on knee joints

Details: 

• Double Air Walker equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• Foundation plate of dia ??175mm and 10 mm thickness is welded at bottom.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.
• Use: For exercise of leg and thigh provide strengthen to leg muscle.

Usage:

• For multiple exercises full body workout and for Developing the strength of upper limbs, muscle, shoulder joints and elbows.

Details: 

• Standing & Seating Twister equipment made up of 3inch “B” class GI pipe; Prime Stand duly,  Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/62005-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For exercise of hip joint, ankle and leg muscles.

Minimum order quantity: 1 Piece

Double Chest Presser equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.The handle frame is made of 42mm OD G.I. pipe.The remaining frame is made of 32mm OD G.I. pipe. Seating frame support of dimension 250 x 150 x 5mm is welded for supporting the pedal seat. MS Seat of size 380mm x 300mm x 5mm is used for supporting the foot. ?? 60mm seamless pipe bushes. Permanent lubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia ??225mm and 10mm thickness is welded at bottom.

Details: 

• Double Chest Presser equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For Developing the strength of upper limbs muscle, shoulder joints, arm muscle and elbows.

Details: 

• Surfing Board equipment made up of 3inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For exercise of leg and thigh provide strengthen to leg muscle.

Details: 

• Double Chest Presser equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For Developing the strength of upper limbs muscle, shoulder joints, arm muscle and elbows.

Details: 

• Double Chest Presser equipment made up of 4inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For Developing the strength of upper limbs muscle, shoulder joints, arm muscle and elbows.

Details: 

• Knee Hip Riser equipment made up of 3inch B class GI pipe; Prime Stand duly bend.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• Developing the strength and flexibility abdominal muscles consuming the fat in waist and abdomen.

Snake Climber equipment made up of 2inch B class GI pipe; Prime Stand duly bend, Foundation center pipe. The remaining frame of ladder steps is made of 32mm OD G.I. pipe. All welded joint are of good quality. High tensile steel with galvanized nut & bolts to be used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Details: 

• Push Up Bars equipment made up of 4inch B class GI pipe; Prime Stand, Foundation center pipe.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For developing the muscles of upper limbs, shoulder and chest.

Minimum order quantity: 1 Piece

Double Wheel Shoulder Builder equipment made up of 3inch B class GI pipe; Prime Stand duly bend, Foundation center pipe. The wheel frame is made of 42mm OD G.I. pipe and the supporting is made of 32mm OD G.I. pipe. 60mm seamless pipe bushes. Permanent lubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia ??175mm and 10mm thickness is welded at bottom. All welded joint are of good quality. Hgh tensile steel with galvanized nut & bolts to be used. The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness.
USE:-for developing the muscles of upper limbs, elbow and shoulder joint.

Details: 

• Cycle equipment made up of 3inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For improving and developing leg muscles and strengthen it.

 Un-Even Bars equipment made up of 3inch B class GI pipe; Prime Stand duly bend. The remaining frame is made of 42mm OD G.I. pipe. All welded joint are of good quality. High tensile steel with galvanized nut & bolts to be used.The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Details: 

• Knee Chair equipment made up of 3inch “B” class GI pipe; Prime Stand duly bend.
• Permanent lubricated Ball bearings 6205zz/62005-2rs.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For improving and developing leg muscles.

Minimum order quantity: 1 Piece

Details: 

• Leg Stretcher equipment made up of 3inch B class GI pipe; Prime Stand duly bend.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For improving and developing leg muscles.

Details: 

• Back Extensioner equipment made up of B class GI pipe of 3" x 1"
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For improving and developing back muscles and strengthen spine area.

Details: 

• Push Up Bench equipment made up of 2inch B class GI pipe; Prime Stand duly bend.
• The seat main frame is made of 3 x 1 rectangular G.I. pipe and supporting is made of 25mm OD G.I. pipe.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For improving and developing arm muscles and abdominal and stomach muscles.

Details: 

• Rower equipment made up of 3inch Bclass GI pipe; Prime Stand duly bend, Foundation center pipe.
• The pins used are made up of 25mm hardened bright bar.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• The bushes (Stopper) used to avoid the collision.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For exercise of arms, shoulders, chest, back and abdomen; full body workout can done.

Details: 

• Arm & Paddle Bike equipment made up of 3inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For improving and developing leg, arm and shoulder muscles and strengthen them.

Details: 

• Single Wheel Shoulder Builder equipment made up of 3inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For developing the muscles of upper limbs, elbow and shoulder joint.

Details: 

• Single Wheel Shoulder Builder equipment made up of 3inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• The wheel frame is made of 42mm OD G.I. pipe and the supporting is made of 32mm OD G.I. pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For developing the muscles of upper limbs, elbow and shoulder joint.

Details: 

• Parallel Bar made up of 2inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For multiple exercise for developing full body workout. Developing the strength and flexibility abdominal muscles consuming the fat in waist and abdomen.

Details: 

• Double Sit Up Board equipment centre frame made up of 3inch “B” class GI pipe.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• Developing the strength and flexibility abdominal muscles consuming the fat in waist and abdomen.

Details: 

• Jungle Jim equipment made up of 42mm OD “B” class GI pipe; Prime Stand duly bend.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

Details: 

• Sit Up Board equipment made up of 42mm OD “B” class GI pipe; Prime Stand duly bend.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• Developing the strength and flexibility abdominal muscles consuming the fat in waist and abdomen.

Details: 

• Back Stretcher equipment made up of 3inch “B” class GI pipe; Prime Stand duly bend.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For improving and developing leg muscles.

Minimum order quantity: 1 Piece

• Horse Rider equipment made up of 4inch “B” class GI pipe; Prime Stand duly bend, Foundation center pipe.• The handle frame is made of 32mm OD G.I. pipe.• The remaining frame is made of 42mm OD G.I. pipe.• A flat of 50mm x 5mm is induced between handle and main pipe.• ?? 60mm seamless pipe bushes.• Permanent lubricated Ball bearings 6205zz/6205-2rs.• Foundation plate of dia ??225mm and 10mm thickness is welded at bottom.• All welded joint are of good quality.• High tensile steel with galvanized nut & bolts to be used.• The Circlips to be used are of 25mm.• Allen Bolts are also used to tighten the closing cap.• Closing cap of HDPE / PPCP Plastic is used. • The powder coating done with Pure polyester powder with 60 to 70 micron thickness.USE:-For improving and developing arm & leg muscles.

• Sit Up Board equipment made up of 42mm OD “B” class GI pipe; Prime Stand duly bend.• The remaining frame is made of 32mm OD G.I. pipe.• The resting frame is made of 50mm x 10mm MS Flat.• All welded joint are of good quality.• High tensile steel with galvanized nut & bolts to be used.• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.USE:-Developing the strength and flexibility abdominal muscles consuming the fat in waist and abdomen.

Details: 

• QuadStation Open MultiGym equipment main frame is made of 4inch B class G.I. pipe.
• Four Station consists of Single Chest Press, Single Leg Press, Standing Seating Twister and Single Air Walker.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• According to requirement, the equipments can be changed; so as the dimension will be changed.

Details: 

• Eight Station Open MultiGym equipment main frame is made of 4inch "B" class G.I. pipe.
• Eight Station consists of Single Chest Press, Single Leg Press, Double Standing Twister, Cross Trainer, Rower, Horse Rider, Single Seated Puller and Single Air Walker.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• According to requirement, the equipments can be changed; so as the dimension will be changed.

Details: 

• Six Station Open MultiGym equipment main frame is made of 4inch B class G.I. pipe.
• Six Station consists of Single Seated Puller, Sky Walker, Single Sit Up Board, Single Leg Press, Single Surf Board and Single Air Walker.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• According to requirement, the equipments can be changed; so as the dimension will be changed.

Details: 

• Multi-Operational Gym equipment main frame is made of 3inch ""B"" class G.I. pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• All welded joint are of good quality.
• High quality rubber grip are also used for firm handling.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For Developing the strength of upper limbs muscle, shoulder joints, arm muscle and elbows.

Details: 

• Cross Trainer equipment made up of 3inch B class GI pipe; Prime Stand duly bend, Foundation center pipe.
• 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-2rs.
• Foundation plate of dia 175mm and 10 mm thickness is welded at bottom.
• All welded joint are of good quality.
• High tensile steel with galvanized nut & bolts to be used.
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap.
• Closing cap of HDPE / PPCP Plastic is used. 
• High quality rubber grip are also used for firm handling.
• The powder coating done with Pure polyester powder with 60 to 70 micron thickness.

• For exercise of leg, thigh, knee and arm provide strengthen to leg & arm muscles and developing the whole body joints.